Design-caused extraordinarily small system volumes result in the comparison to the achievement.From this minimum refrigerant fillings and if necessary substantial savings with condition result and equipment of the engine rooms.

DDC regulation with the possibility for the combination on superordinate monitoring systems, remote maintenance possible.Scrollverdichter with 1 - 4 performance levels, for the connection to external condensers, Evaporator with thermalstatic Einspritzventil, all heat exchangers as disk heat more tauscher in hardsoldered or full-welded building method, integrated circulation pumps.

Rotary screw compressor constantly regularly, for the connection to external condensers, Evaporator with electronic Einspritzventil, all heat exchangers as disk heat more tauscher in hardsoldered or full-welded building method, integrated circulation pumps.

Water Chiller (For placing inside)

We can provide water chillers for placing inside. The advantage for placing a water chiller inside is, that a using of a anti freezing medium (glycol) isn’t necessary. Further more by choosing a water chiller for placing inside it is movable and flexible instead of a fixed placed water chiller outside.

Water Chiller (For placing outside)

We can provide water chillers for placing outside. The advantage for placing a water outside to contain solutions with a long distance between water chiller and SideCooler®. Also created for a version without a space for placing a water chiller inside.

Packaged air-cooled water chillers and with centrifugal fans. Range with hermetic Scroll compressors and R410a refrigerant gas.

Compressor: Hermetic. rotary Scroll compressor,Complete with thermal protection.

Water Side Heat Exchanger: Adequately insulated Stainless steel plate exchanger, complete with antifreeze heater and water flow differential pressure switch.

BRACH + MOLL Water Chiller

Unit Frame:
Modular self-supporting frame in galvanised sheet steel with baked-on polyester powder coating (colour RAL 5014) and threaded fasteners in stainless steel.

Compressors:
Hermetic scroll compressors connected in parallel (tandem or trio configuration).Equipped with crankcase heater, thermal protection, liquid line sight glass, contactors and oil equalisation line.

Refrigerant Circuit:

The circuit includes: liquid line shut-off valve, charge connection, liquid line sight glass, filter dryer, electronic expansion valve, safety valve, pressure transducers to relay information on high and low pressure values and relative condensing and evaporating temperatures for display on the controller, high and low pressure switches.

Data Center Cooling System | Direct Rack Cooling | Free Cooling | Cold Aisle Containment | Water Chiller |
Active Cooling Solutions