SP54 Racks

SP Complete Network Cabinets

SP54 Rack - Network Cabinets with IP 54 Rating:

	High-grade steel cabinet (Light grey RAL 7035, black RAL 9005). Profile technology guarantees maximum stability
	Fully assembled with basic accessories.
	Flexible interior - designed to accommodate all currently available IT components
	Simple to assemble and disassemble - all cabinets can be dismantled.
	Accessible from all sides (removable doors and panels)
	Can be used as stationary or mobile units
	100% modular system, can be extended at any time
	Extremely strong frame with load bearing capacity of up to 1000 kg; higher load bearing capacities available on request.
	Protection rating: IP54, all-round sealing.

Material:

	Framework: 2.00 mm steel sheet, multiply profiled
	Doors: 1.25 mm steel sheet with multiply folded edges and 3 mm single pane safety glass panel ( front door only)
	Side panels: 1.00 mm steel sheet
	Plinth: 1.25 mm steel sheet
	Top / bottom cover panels: 1.25 mm steel sheet
	482.6 mm (19“) angles: 2.00 mm steel sheet

Finish:

	Framework, doors, side panels, plinth,top/bottom covers: high-quality powder coating in Light grey RAL 7035 or black RAL 9005
	Installation kit for 482.6 mm (19“) angles:galvanised

Locking:

	Doors: standard pivoted handle with security lock,prepared for installation of a profile half cylinder or other standard lock,4-point locking system
	Side panels: screw-fastened

International Standards:

	IEC 297-1/2 (19“)
	IEC 917-2-1 (metric)


	SP 54 Racks	418 KB	219 KB

Install the below plugins if you don't have for a greater experience.
PDF Reader

SP Rack- Complete Server Cabinets:

SP54 Rack – The perfectly safe solution for server cabinets in IP54:

The most up-to-date cabinet solutions for all standard server and network components- even for combinations of components from different manufacturers.

	Maximum assembly range: 900 - 1000 mm deep, 600 – 800 mm wide
	Maximum security:side panels screw-fastened, doors with pivoted handle and lock
	All-round sealing
	Simple to assemble and disassemble - all cabinets can be dismantled
	With plinth
	In Light grey RAL 7035
	Extremely strong frame with load bearing capacity of up to 1000 kg; higher load bearing capacities available on request
	IP54 rating

Dimensions:

	Width: 600 mm, 800 mm
	Height without plinth:1200 mm and 2000 mm
	Depth: 900 mm and 1000 mm

Material:

	Framework: 2.00 mm steel sheet, multiply profiled
	Doors: 1.25 mm steel sheet
	Glass pane: 3 mm single pane safety glass
	Side panels: 1.00 mm steel sheet
	Top / bottom cover panels: 1.25 mm steel

Locking:

	Doors: standard pivoted handle with security lock or other standard lock, 4-point locking system
	Side panels: screw fastened

Finish:

	Framework, doors, side panels, top/bottom covers: high-quality powder coating in Light grey RAL 7035 or black RAL 9005
	482.6 mm (19“) mounting angles: galvanised

International Standards:

	IEC 297-1/2 (19“)
	IEC 917-2-1 (metric)

Sound-deadened + dust protected IT Enclosures:

SP54-based IT Enclosures:

Basic frame with removable side-panels and glazed front door - single pane safety glass, active ventilation and thermostat, sound deadening,seals to protect against dust and moisture,and mounted on castors for mobility.

	Standard: with shelves
	Comfort: with complete 19“ system installation (24 or 37 U)

Work stations in separate locations are increasingly being linked together in networks. SCHÄFER IT cabinets provide the ideal basis for IT infrastructures.

With this elaborate concept, allowing the installation of any IT components, such as servers, hubs, routers, switches and their wiring both for desktops and towers as well as for 482.mm (19“) formats, a central enclosure can become the junction for the connection of numerous work stations.

All IT Enclosures consist of a basic frame, on which side panels, front glazed door and sheet steel rear door can all be detached to guarantee free access for installation and maintenance. Pivoted door handles with security locks prevent unauthorised access.

There are two fans mounted in the roof plate (can be extended to four if required. Installation holes are available) with a thermostat to counter thermal problems right from the outset. All IT Enclosures are provided with noise reduction(approx. 39 dB (A) for 2 fans)

Material:

	Basic cabinet: 2.00 mm sheet steel
	Doors: 1.25 sheet steel
	Glass: 3 mm single pane safety glass (SPSG)

Finish:

Powder coating in RAL 7035 Light grey

Locking:

Pivoted handle with security lock

Useable internal dimensions:

	Cabinet Height 24 U: (W x H x D) 491 x 1091 x 980 mm
	Cabinet Height 37 U: (W x H x D) 491 x 1691 x 980 mm

Data Center Consultancy | Data Center Audit | Data Center Testing | Data Center Training | Environment Monitoring System