NT Box:

Economical and easy to assemble – Wall Cabinets and Mini Racks from SCHÄFER

The wall-mounted NT Box was specially developed for small networks, sub-distributors and floor distributors. The major practical problem of accessibility is solved by the fact that the door can be very quickly removed once opened, allowing the side panels to be slid out forwards.This way, the housing is easily accessible from three sides and allows all components to be installed easily. To change the doors from left to right-hand opening, simply lift out the hinge pin and replace them in the fixings provided.Cable entry apertures with brush strips are fitted in the top and bottom panels and/or rear panel and can be replaced by flange plates on request. The side panels are passively ventilated.

The NT Box is available in 15 different sizes.The integrated 482.6 mm (19“) mounting angles can be installed either at the front or rear and are Depth adjustable.All NT Boxes and the provided accessories follow the plug & play principle.All NT Boxes can be placed on the floor,whether they are fitted with feet or not.

NT Box Flat-Pack:

Practical delivery and quick to assemble

The development of the flat-pack version of the NT Box is SCHÄFER‘s response to the growing logistics and assembly demands of network technology.

The base model consists of the SCHÄFER lowcost,modular, standard wall-mounted system with removable doors and side panels.

The flat-pack NT Boxes, however, are designed to have the lowest possible packaging volume, while keeping the required assembly work to a minimum.In only four steps, the complete distributor - either on the ground or wall-mounted - can be assembled by one person. Our standard range of accessories enables the Box to be extended as required.

The SlimLine NT Box, designed for wall mounting with a minimum of depth, was specially developed for small networks,subdistributors and floor distributors.

Material:

The NT Mini Rack was specially developed for small networks, sub-distributors and floor distributors as a floor-standing unit.

Material:

NT Universal Rack:

All-round access

Component and cable accommodation with easy access from all sides This practical universal rack, as an open mobile or stationary unit, can accommodate all 482.6 mm (19“) components on 43 Height units. The torsion-resistant frame made of 2 mm sheet steel with base plates is a very stable structure. Its all-round accessibility makes installation easy. As an optional extra,a second 19“ mounting angle can be installed in a 50 mm pitch pattern. All accessories from the SCHÄFER standard range, such as shelves, slide rails, etc. are compatible.

Finish:

Data Center Consultancy | Data Center Audit | Data Center Testing | Data Center Training | Environment Monitoring System